Monster BOGO Printing

EDDM Artwork Preparation Guide

Preparing artwork for Every Door Direct Mail involves more than choosing a postcard size. The correct template, safe margins, folds, image quality and postal layout all affect the finished piece.

This guide covers practical prepress checks. Always follow the specifications supplied for your particular print product and verify current USPS mailing requirements.

Start With the Correct Finished Size

Confirm the finished, trimmed dimensions of the exact product you are ordering. A flat bifold sheet and its folded finished size are different measurements. Do not assume that a product sample image establishes postal eligibility.

Add Bleed Where the Printer Requires It

Artwork that reaches a trimmed edge usually needs additional image area beyond the trim line. Request the template for your selected product and use its specified bleed. Avoid guessing a universal bleed measurement.

Keep Text and QR Codes Inside the Safe Area

Place phone numbers, addresses, QR codes, logos and important offers comfortably inside the trim and fold boundaries. Allow additional clearance near folds and any required postal addressing area. Confirm the printer's actual safe-area specification.

Check Image Resolution

For many commercial print jobs, 300 pixels per inch at the intended printed size is a useful image-resolution target. Enlarging a low-resolution image does not restore missing detail. Inspect small text and QR codes at final print size.

Confirm Color and File Requirements

Ask which PDF standard, color mode, embedded fonts and image settings the printer accepts. If CMYK artwork is required, review a proof because conversions from screen RGB colors can change appearance.

Prepare Folded Mailers Carefully

Check panel order, fold direction, orientation and any crossover artwork. Keep essential text away from folds. Ask for a flat-layout template and review both the unfolded and folded proofs.

Plan for USPS EDDM Requirements

USPS has size, thickness, weight, addressing, indicia and preparation rules that can change. A format marketed for direct mail is not automatically eligible for every USPS EDDM service. Verify current requirements with USPS and the printer before production.

Review a Final Proof Before Printing

Check spelling, contact information, offer expiration dates, QR code destinations, artwork edges, folds, postal areas and the correct quantity. Confirm whether printing, bundling, delivery and postage are included in your quote.

How Many EDDM Pieces Should You Print?

Start with the number of eligible delivery addresses in the postal routes you plan to cover. Do not estimate quantity from a city's population or assume every address is eligible for your selected EDDM service.

Step 1: Confirm Your Postal Routes

Use the current USPS EDDM route-selection tools and eligibility rules to identify your target routes. Record the eligible address count for each selected route. Confirm whether your mailing is residential-only or includes eligible business addresses.

Step 2: Add Your Route Quantities

For example, if your verified route counts are 420, 510 and 470 eligible addresses, your planned mailing quantity is 1,400 pieces. These are illustrative numbers, not actual USPS route counts.

Planned mailing pieces = sum of eligible addresses across selected routes.

Step 3: Decide Whether You Need Extra Copies

You may want additional printed pieces for samples, internal review or other approved uses. Do not add unapproved extras to USPS mailing bundles. Confirm your printer's order increments and your mailing provider's preparation requirements.

Total print quantity = planned mailing pieces + separately needed extra copies.

Step 4: Estimate Printing and Postage Separately

Request a printing quote for the actual quantity, size, paper, finish and turnaround. Check the current USPS postage rate for the applicable EDDM service before calculating postage.

Estimated postage = eligible mailed pieces × applicable postage rate per piece.

Estimated campaign budget = printing + postage + preparation + delivery + other applicable charges.

Step 5: Compare the Cost Per Address

Divide the total campaign budget by the number of eligible addresses you expect to mail. This provides a planning figure for comparing formats and quantities.

Estimated cost per mailed address = total campaign budget ÷ mailed address count.

For illustration, a $900 total budget divided by 3,000 mailed addresses equals $0.30 per address. This is a mathematical example, not a Monster BOGO Printing price or USPS rate.

Step 6: Check Your Final Mailing Plan

Before ordering, confirm route counts, finished mailpiece eligibility, quantity, production timing, artwork approval, mailing preparation and delivery responsibilities. Route counts and postal requirements can change, so verify them again before mailing.

Ready to compare printing options? Visit our EDDM printing overview or request a printing quote using your planned quantity and format.

Frequently Asked Questions

Is 300 DPI enough for EDDM printing?

It is a common target for raster images at final print size, but your printer's template and file specifications control the actual requirements.

Can I use the same file for a postcard and a bifold?

Not without checking the layouts. Folded mailers need correct panel positioning, fold direction and finished dimensions.

Does the printing quote automatically include USPS postage?

Not necessarily. Confirm printing, mail preparation, delivery and postage as separate quote items.

Explore EDDM Printing Options

Compare available format examples on our EDDM printing page, then confirm the template, quantity and production specifications for your project.

Request a Printing Quote